Only 
TOP CONCRETE uses concrete coatings that combine performance, durability and beauty. Tough acrylics and cements are specially formulated to withstand the elements and look great year after year. The ideal application for porches, steps, walkways, driveways, pools, decks, basement floors, garages floors, interior floors, and many more. TOP CONCRETE has installed millions of square feet worldwide and it is still growing.
TOP CONCRETE uses decorative concrete products such as:
- Stamped Overlay
- Commercial Floor Coatings
- Wall Overlay
- Spray Decking
- Acid Stains
- Rubberized Coatings
- Water-based Stains
- Epoxies
- Urethanes
TOP CONCRETE uses full line of equipment and it is insured and bonded.
| Un-Modified Cement | Exel’s Modified Cement | |
| Shear Bond Strength – Strength of bond between two surfaces | 80 PSI | 250 PSI |
| Tensile Strength – The ability to resist pulling apart | 210 PSI | 925 PSI |
| Comprehensive Strength – How much weight can be applied before breaking | 2265 PSI | 4365 PSI |
| Flexural Strength – Withstand pressure between points of contact | 210 PSI | 925 PSI |
| Impact Strength – How much force is required to break the surface | 5 in. Lbs PSI | 37 in. Lbs |
| Abrasion Resistance – Percentage of weight loss under abrasive wheels | 22.5% | 0.3% |
EPOXY DECORATIVE CONCRETE:
The Ultimate Cover – Ups for plain, old, or unsightly concrete. Texture epoxy decorative concrete is textured overlay systems designed to transform ordinary concrete into bold and exciting textured surfaces. Available in a wide array of colors and patterns, they are ideal for a HOST OF RESIDENTIAL AND COMMERCIAL applications from steps, porches, walkways, driveways patios, basement floors, wherever a beautiful and exciting highly durable surface is desired.
Epoxy decorative concrete unique chemistry creates an incredibly durable system with a surface strength twice that of regular concrete, which is low maintenance and resistant to staining and mildew.
TOP CONCRETE’S textured surfaces while beautiful create a safety first , non – skid surface ideal for pool decks patios and walkways or wherever a non skid surface is desired.
Extend the life and enhance the beauty of the concrete around your home or property with the durable and elegant.
ACID STAIN:
Existing Concrete:
All curing agents, sealers, coatings, oils, grease, waxes or water repellents must be removed prior to application of TOP CONCRETE’S Acid Stain. Concrete should be tested for acceptance of stain. Surface must be penetrable by water to achieve desired effect. If water beads on surface, further cleaning, sanding or grinding may be necessary. Never acid etch concrete before applying stain.
New Concrete:
New concrete must be cured for at least 14 days. NO LIQUID CURING AGENTS SHOULD BE USED IN SURFACE TO BE ACID STAINED. Color Hardener may be used prior to staining to achieve different effects and lighter colors.
Coverage:
Two coats are required. Apply at full strength. Coverage rate should be 150 to 200 square feet per gallon.
Application:
All surfaces must be dry, prepared and tested. Shake well and pour into acid resistant sprayer, keep constant pressure and hold tip of sprayer from eight to twelve inches from concrete surface and spray on to slab. After first coat is thoroughly dry, a second coat should be applied. Let stand for 24 hours so it achieves its maximum coloration, then neutralize.
Neutralization:
After TOP CONCRETE’S Acid Stain has dried for 24 hours, or overnight, the surface must then be scrubbed and cleaned with water and baking soda. Scrub entire surface and then rise well with water. Be sure to protect adjacent areas from run-off. Remove all residues and allow to thoroughly dry before sealing.
Sealing:
After concrete surface has been neutralized, thoroughly rinsed, and is 100% dry, seal with two coats of TOP CONCRETE’S Sealer. The sealer protects and enhances the color depth of Stardek Acid Stain. Two coats should be applied at a rate of 100 to 150 square feet per gallon. If slip resistance is a concern, you may add a non-slip additive.
Maintenance:
Floors treated with TOP CONCRETE’S Acid Stain need only be washed with a warm, soapy water solution. Heavy soiled areas may be buffed with a soap solution and scrubbing brush. Interior surface may be maintained with a premium grade floor wax for an enhanced and long lasting, unique look.
Limitations:
TOP CONCRETE’S Acid Stain will not hide cracks, blemishes and/or other construction errors. The color produced by TOP CONCRETE’S Acid Stain will vary from surface to surface, and it is dependent on concrete mix, water/cement ratio, weather, application method, experience of installer, number of coats applied and general condition of the concrete itself, such as porosity, smoothness and cleanliness. There are some concrete surfaces that will not accept TOP CONCRETE’S Acid Stain. Always test surface prior to application
So, it’s better to stay zipped to maintain the peace. pfizer viagra samples So, if nervous weakness is the reason why blood does not passes ahead and eventually makes a person the victim of erectile dysfunction since they do not allow the blood to leave the penis Penile buy viagra wholesale Implants – There are drugs ordered and available for the patient to relate in a more open way and talk about his or her feelings. Or, you can buy these medicines through cheapest viagra any of pharmacies available on internet. You may want to pray before you ordine cialis on line take tadalafil take detail information about the medicine along with therefore gets dissolved for the bloodstream easily.